DC Operated Diaphragm pumps

Light duty diesel pump.• 10 GPM (38 LPM) at 10' (3m) head.• 22' (7m) maximum total head.• Self-priming up to 9' (2.8m)vertical lift.• 22°F (-30°C) to 104°F (+40°C)operating temperature range.• 30 minutes at 10' (3m) at 86°F (30°C).• IP55 and thermally protected motor.• Integral switch fitted as standard.• Accessories available.• ISO 8846 MARINE (Ignition Protection).

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Flojet Triplex High Pressure Pumps are engineered tobe the most advanced and reliable product available.The redesigned and improved pumps offer unequaledperformance and life.Flojet’s unique three chamber design allows these pumps to operate at exceptional flow rates and pressures. With operating pressures up to 150 psi (10.3 bar) and self-priming capabilities. Flojet Triplex pumps are designed to be the most versatile pumps on the market today. They are the ideal solution for applications including spraying, misting, filtration,cooling, dispensing and pressure boosting.

The Flojet Triplex Series High Pressure Pumps are available now in 12V DC, 24V DC, 115V AC and 230V AC models, and being made from Santoprene®/EPDM and Santoprene®/Viton® makes them capable of handling a broad range of chemicals.
Features and Benefits• Flow rates up to 1.4 GPM (5.3 LPM) and operating pressureof up to 150 psi (10.3 bar)• Constructed from a selection of materials suitable for handling a broad range of chemicals• Innovative bypass design• Self priming up to 8ft (2.4m)• Sealed motor• Can run dry for extended periods of time without damage• Coinjected molded diaphragm technology• Consistent pressure over time Triplex® Series High Pressure Pumps
Flojet is a trademark of Xylem Inc. or one of its subsidiaries. F100-305 Rev C. 1/12

Applications• General Industrial- Chemical washdown- Evaporative Cooling Systems• Agricultural- Misting- Spot Sprayers- Boom Sprayers (to reach tree tops)• Floor Care- Carpet Extractors- Carpet Cleaning• Automotive- Boost Cooling
Voltage 12 V DC, 24V DC, 115V AC, 230V ACAmp Draw 1.2 Amps Max for 115V ACPump Head Material Glass Filled NylonElastomersDiaphragmSantoprene®Check Valve EPDM or Viton®Maximum Flow Rate 1.4GPM (5.3 LPM)Maximum Pressure 150 psi (10.3 bar)Duty Cycle IntermittentWeight 7.6lbs (3.5kg)Certifications CE, NSF componentsPort Size Inlet/outlet 3/8" NPTF

Product Details:

DC Operated Diaphragm Pumps, available with 12/24/32 VDC. Also availble with 230V AC. Self Priming, continious & imtermettent operation.

The FLOJET 2840 series Booster Pump Systems are designed to provide a constant water pressure of 25 to 45 psi (1.7 - 3.1 bar) and maximum flow of 3.5 or 4.5 GPM at 10 psi (0. 7 bar). The pump is fully automatic with a built-in switch and check valve to maintain system pressure and will supply smooth water flow from a trickle to full flow Typical uses are; Commercial Ice Machines, Pure Water Dispensing, Water Purifiers, Small Domestic and Commercial Appliances where the water supply pressure is very low or fluctuates widely

Additional Information:

• Minimum Order Quantity: 1 Piece

JABSCO’S PUREFLO® 4-piston diaphragm pump is designed to be used in pharmaceutical,biotech, food or cosmetic applications. The design complies with the very stringent requirements ofthese industries.

PUREFLO® 21 DIAPHRAGM PUMP The pump principal guarantees a sensitive handling of the product. Minimal thermal effect, even on small volumes.
Typical Examples:
¢ Protein Solutions
¢ Cell Suspensions
¢ Bacteria, yeast, fungi, mammalian cells
¢ Virus Suspensions
¢ Polymer Solutions
¢ Food and cosmetic ingredients

Used in…
¢ filtration, chromatography

Feed pump for…
¢ centrifuges and separators
¢ for filter systems

Additional Information:

• Minimum Order Quantity: 1 Piece

There are many situations where portable water is needed for a variety of drink dispensers, in locations where filtered water is not available. A good example is a portablecoffee station. These are often moved into ideal locations for conferences, meetings or other specific events, but those convenient locations often don’t have plumbingfor water. Even businesses that want a permanent installation may not want to incur the cost of installing plumbing to the desired location.A common solution in these situations is to use purified bottled water as the water source for the drink dispenser with a pump to provide pressure. Using purified bottledwater has the advantage that no plumbed water is required, and the pump provides constant pressure for beverage dispensers. The pump also eliminates the need to liftthe 40+ pound water bottle up high and flip it into a typical water dispenser.Flojet offers bottled water systems with options to work with 1 or 2 jugs of bottled water at a time. Single inlet models feature one suction wand while the dual inlet modesfeature two. Dual inlet models are ideal in high water use situations.All Flojet bottled water systems shut off automatically when the water source is depleted. When water is restored, the pump automatically restarts. A sealed vacuum keepswater fresh and a built-in check valve prevents back flow. The pump operates quietly and automatically turns on and off when the faucet is opened and closed. Systems areavailable in 115F and 230V options

Additional Information:

• Minimum Order Quantity: 1 Piece